Flake & Quartz Epoxy Floors in Austin, TX

Decorative flake and quartz floor systems that add color, texture and grip to garages, shops, patios and commercial spaces. Every floor is sealed with a UV-stable polyaspartic clear coat.

GET MY FREE QUOTE
GET FREE QUOTE (512) 812-8181

Flake & Quartz Epoxy Floors in Austin, TX

Flake & Quartz Epoxy Floors in Austin, TX

Decorative flake and quartz floor systems that add color, texture and grip to garages, shops, patios and commercial spaces. Every floor is sealed with a UV-stable polyaspartic clear coat.

Decorative flake and quartz floor systems that add color, texture and grip to garages, shops, patios and commercial spaces. Every floor is sealed with a UV-stable polyaspartic clear coat.

What Is a Flake Epoxy Floor?

A flake floor is a coating system where colored acrylic vinyl chips are broadcast into a wet base coat, then sealed under a clear topcoat. The flakes give the floor its texture, color and a speckled, granite-like look that hides dust, tire marks and small imperfections.

It's the most popular floor we install in Austin. Our full-flake floors use a 99% solids polyurea base coat, a full flake broadcast and an 85% solids polyaspartic clear coat. That system cures fast, so most garages are done in one day.

Why Austin Homeowners and Businesses Choose Flake Floors

  • Hides dirt and wear. The speckled pattern hides dust, tire marks and small chips far better than a solid color.

  • Slip resistant. The broadcast creates a textured surface with grip, even when the floor is wet.

  • Stain and chemical resistant. Oil, gas, antifreeze and spills wipe up instead of soaking into the concrete.

  • UV-stable finish. The polyaspartic clear coat resists yellowing in the sun near garage doors and on patios.

  • Fast install. Most residential flake floors are installed in a single day.

  • Limited lifetime warranty. Our Essential, Signature and Premier full-flake floors are covered against delamination, peeling and chipping.

Flake vs. Quartz Floors: Which Is Right for You?

Quartz floors use hard, crushed quartz granules broadcast into the coating and sealed with a thick, high-performance topcoat. Quartz is far harder and more abrasion-resistant than vinyl flake, and its coarse texture delivers serious traction — even when the floor is wet.

Flake floors Vinyl flake floors are the go-to choice for garages, workshops, porches and patios. They come in a wide range of color blends and give you a clean, finished look at the best price.

Quartz floors A quartz floor uses colored quartz granules broadcast into the coating instead of vinyl chips. Quartz builds a harder, more textured surface, which makes it a strong choice for commercial kitchens, wet areas and spaces that see heavy foot traffic.

Not sure which one fits? We'll look at how you use the space and recommend the system that makes sense, not the most expensive one.

Flake Floor Options

  • Full broadcast. Flakes cover the entire base coat for maximum texture, color and durability. This is our standard for garages.

  • Partial broadcast. A lighter scattering of flakes over a solid base color for a cleaner, more minimal look.

  • Standard colors. Essential includes select standard flake blends, and Signature includes our full standard selection.

  • Premium and custom blends. Premier adds premium and custom flake blends for a floor that's truly yours.

  • Moisture vapor barriers. If your slab shows moisture, we can add a moisture-mitigation layer before coating.

  • Low-odor sealers. Ask us about low-odor options for interior and attached-garage projects.

Where We Install Flake and Quartz Floors

Flake is the more affordable system; quartz costs more because it uses more material and additional coats. Your price depends on:

  • Residential garages and workshops

  • Patios, front porches and pool decks

  • Commercial kitchens

  • Showrooms and retail spaces

  • Warehouses and shop floors

OUR 6-STEP PROCESS

How We Install a Floor Built to Last

Illustration of a worker diamond grinding a concrete floor

1. DIAMOND GRINDING

We grind the concrete with diamond tooling and dustless equipment to profile the surface and keep dust out of your home.

Illustration of a worker repairing cracks in concrete

2. REPAIRS

We fill cracks, pits and chips, then grind again for a smooth, even base.

Illustration of a worker applying the polyurea base coat

3. POLYUREA BASE COAT

We apply a 99% solids polyurea base coat that bites into the ground concrete and bonds tightly to the slab.

Illustration of a worker broadcasting decorative flakes

4. FLAKE BROADCAST

We broadcast your chosen flake color into the base for texture, slip resistance, and a custom look.

Illustration of a worker scraping and vacuuming loose flakes

5. SCRAPE & RECLAIM

Once cured, we scrape the floor in every direction, vacuum, and reclaim excess flake for a clean, even surface.

Illustration of a worker rolling the polyaspartic topcoat

6. POLYASPARTIC UV TOPCOAT

We finish with an 85% solids, UV-stable polyaspartic clear coat for a durable, showroom-quality finish.

How Much Does a Flake Floor Cost in Austin?

Full-flake garage floors start at $1,745 for a one-car garage and $2,345 for a two-car garage with our Essential package. Signature starts at $1,890 / $2,595, and Premier starts at $2,195 / $2,995. Depending on the size and condition of your floor, your final price may come in lower than the listed price.

Patios, porches, commercial spaces and quartz floors are priced by square footage after a free on-site estimate.

  • Residential garages and workshops

  • Patios, front porches and pool decks

  • Commercial kitchens

  • Showrooms and retail spaces

  • Warehouses and shop floors

Why Austin Trusts Foxy Epoxy Floors

  • Full broadcast. Flakes cover the entire base coat for maximum texture, color and durability. This is our standard for garages.

  • Partial broadcast. A lighter scattering of flakes over a solid base color for a cleaner, more minimal look.

  • Standard colors. Essential includes select standard flake blends, and Signature includes our full standard selection.

  • Premium and custom blends. Premier adds premium and custom flake blends for a floor that's truly yours.

  • Moisture vapor barriers. If your slab shows moisture, we can add a moisture-mitigation layer before coating.

  • Low-odor sealers. Ask us about low-odor options for interior and attached-garage projects.

Recent Flake & Quartz Projects

See the color, texture and finish on real flake and quartz floors across Austin and Central Texas.

Gray and black flake epoxy garage floor coating in a two-car garage with white walls
Gray and black flake epoxy garage floor coating in a two-car garage with white walls
Light gray flake garage floor coating with coated stem walls in an empty garage
Black and white flake epoxy garage floor with a high-gloss finish and Foxy Epoxy Floors logo on the wall
Close-up of a glossy gray and tan full-flake garage floor coating
Blue-gray flake garage floor coating with a glossy polyaspartic clear coat in a two-car garage

Flake & Quartz Floor FAQs

What's the difference between flake and quartz floors?

Both are broadcast systems, but flake uses decorative vinyl chips for looks and customization, while quartz uses hard crushed quartz granules for maximum durability and slip resistance. Flake is the more decorative choice; quartz is the heavy-duty, high-traction choice.

What is a flake floor made of?

Flake floors use vinyl chips and are the most popular choice for garages. Quartz floors use quartz granules, which create a harder, more textured surface for commercial kitchens and heavy-traffic areas.

Do flake floors hide dirt?

Yes. The speckled pattern hides dust, tire marks and small chips much better than a solid-color floor.

Are flake floors slippery?

No. The flake broadcast adds texture and grip, even when the floor is wet.

How long does a flake floor take to install?

Most residential garages are done in one day. You can walk on the floor that evening and park on it 24–48 hours later.

Can flake floors go outdoors?

Yes. Because our clear coat is UV-stable polyaspartic, flake floors work well on patios, porches and pool decks.

READY TO TRANSFORM YOUR CONCRETE?

Get a free, no-pressure quote from a locally owned team that does it right the first time. One-day garage installs are available across Austin and Central Texas.

READY TO TRANSFORM YOUR CONCRETE?

Get a free, no-pressure quote from a locally owned team that does it right the first time. One-day garage installs are available across Austin and Central Texas.

Serving Austin, the Hill Country & North San Antonio

Austin, TX, USA

Austin · Round Rock · Cedar Park · Georgetown · Pflugerville · Leander · Lakeway · Dripping Springs · Kyle · San Marcos · New Braunfels

We work in 39 communities within about an hour of our South Austin base.

Not sure if you're in our area? Give us a call