One-Day Garage Floor Coatings in Austin, TX

Polyurea and polyaspartic garage floors that handle Texas heat, hot tires and everyday mess. Most garages are installed in a single day, with packages starting at $1,499*.

GET FREE QUOTE (512) 812-8181

One-Day Garage Floor Coatings in Austin, TX

One-Day Garage Floor Coatings in Austin, TX

Polyurea and polyaspartic garage floors that handle Texas heat, hot tires and everyday mess. Most garages are installed in a single day, with packages starting at $1,499*.

Polyurea and polyaspartic garage floors that handle Texas heat, hot tires and everyday mess. Most garages are installed in a single day, with packages starting at $1,499*.

A Garage Floor Built for Austin Heat and Everyday Use

Bare concrete in an Austin garage takes a beating. Hot tires, oil drips, dust, cracks and triple-digit summers all wear it down. A professional garage floor coating seals that slab under a tough, easy-to-clean surface that looks finished and stays that way.

Our full-flake garage floors use a 99% solids polyurea base coat, a full decorative flake broadcast and an 85% solids polyaspartic clear coat. It's a flexible, UV-stable system that cures fast, which is why most garages are done in one day. We install garage floors across Austin and the surrounding communities, from Round Rock and Cedar Park to Kyle and Dripping Springs.

Why Homeowners Choose Our Garage Floor Coatings

  • One-day installation — Most garages are prepped and coated in a single day. A typical two-car garage is a 6–8 hour job.

  • Built for Texas sun — The polyaspartic clear coat is UV-stable, so the floor near your garage door won't yellow like standard epoxy.

  • Hot-tire resistant — The system stands up to hot tires coming off Texas highways without lifting.

  • Easy to clean — Oil, dirt and spills wipe off a sealed surface instead of soaking into raw concrete.

  • Slip resistant — A full flake broadcast adds texture and traction, even when the floor is wet.

  • Stain and chemical resistant — Gas, oil, antifreeze and road salt don't stain it the way they stain bare concrete.

  • Brighter garage — A glossy coated floor reflects light and makes the whole space feel cleaner.

  • Limited lifetime warranty — Our Essential, Signature and Premier floors are covered against delamination, peeling and chipping.

Flake, Metallic, and Solid Color Options

Most Austin homeowners choose a full-flake floor. It hides dust and tire marks, adds texture underfoot and comes in a wide range of standard colors. Signature includes the full standard flake selection, and Premier adds premium and custom blends.

Want something different? A metallic epoxy floor gives your garage a one-of-a-kind marbled, high-gloss look. A solid-color floor keeps things clean and simple. See the full color charts on our Color Options page.

How Our One-Day Garage Floors Work

Traditional epoxy can take several days to install and cure. Our polyurea and polyaspartic system cures much faster, so we can grind, repair, coat and seal your garage in a single visit for most homes. You can walk on the floor that evening and park on it again 24–48 hours later.

Installation time doesn't include curing time. Before we leave, we'll give you clear instructions for walking on the floor, moving your things back and parking. We also email aftercare instructions so your floor stays clean and glossy.

Garage Floor Package Options

Choose the system that fits your budget, finish and project. Start with our budget-friendly solid-color option or step up to one of our full-flake systems.

Solid-Color —
Starting at $1,499* (Entry-Level Option)

A professionally prepared, streamlined solid-color garage floor at a budget-friendly price.

  • Up to 450 sq. ft. for qualifying garages

  • Mechanical diamond-grind preparation

  • One pigmented polyurea coating

  • Choice of standard Gray or Sand Tan

  • One-day installation for qualifying projects

  • No decorative flakes or clear topcoat

Essential —

1-Car $1,745+ · 2-Car $2,345+ (Best-Price Full-Flake)

Professional quality with streamlined service options.

  • Mechanical diamond-grind preparation

  • 99% solids polyurea base coat

  • Full decorative flake broadcast

  • 85% solids polyaspartic clear coat

  • Standard slip-resistant texture

  • Select standard flake colors

  • Limited lifetime warranty

Signature —

1-Car $1,890+ · 2-Car $2,595+ (Most Popular)

The complete Signature system with the enhancements you choose for a fully customized garage.

  • Everything included with Essential

  • Full standard flake color selection

  • More scheduling flexibility

  • Expanded local service area

  • Minor crack and surface repair allowance

  • Additional edge and detail work

  • Limited lifetime warranty

Premier —

1-Car $2,195+ · 2-Car $2,995+ (Most Customizable)

The complete Signature system with the enhancements you choose for a fully customized garage.

  • Everything included with Signature

  • Premium or custom flake blends

  • Additional crack and surface repair

  • Garage steps and stem walls

  • Garage-door aprons

  • Additional edge and vertical detailing

  • Included enhancement allowance

  • Limited lifetime warranty

Package prices are approximate starting prices for typical one- and two-car garages. Garage sizes vary, even when two garages are both called "two-car." Depending on the size and condition of your floor, your final price may come in lower than the listed price. Three-car garages, oversized garages, workshops and unusually shaped floors are measured before pricing. Photos of your floor help us spot cracks, old coatings and stains ahead of time. Every price is confirmed in a written proposal before we schedule your install.

Professional preparation. Simple finish. Budget-friendly price.

Give your garage a cleaner, more finished look with a professionally installed solid-color polyurea coating. This option includes proper mechanical prep without the added cost of decorative flakes or a clear topcoat.

What qualifies for the $1,499 price?

  • Residential garages within 30 driving miles of our South Austin location (ZIP 78748)

  • Bare, uncoated concrete in sound condition

  • No significant contamination, extensive damage or moisture conditions that need extra treatment

  • An empty garage with clear access to the whole floor and room for our equipment

  • No more than 450 square feet of garage floor

What costs extra?

  • Removing existing paint, sealers, coatings or adhesives

  • Crack, joint, pit or spall repair, or leveling

  • Extra prep for oil contamination or unusually porous or damaged concrete

  • Moisture testing beyond the included assessment, and moisture-mitigation treatments

  • Stem walls, steps, exterior aprons or other added surfaces

  • Moving or storing belongings

  • Decorative flakes, clear topcoats or other upgrades

If we find unexpected conditions during prep, we'll talk with you about any scope or price change before doing extra work.

What should I expect from the finish?

This is a single-coat, solid-color system, not a full-flake floor. Cracks, pits, repair marks and other concrete imperfections may still show. The coating may amber or shift in color with sunlight, especially near the garage door.

OUR 6-STEP PROCESS

How We Install a Floor Built to Last

Illustration of a worker diamond grinding a concrete floor

1. DIAMOND GRINDING

We grind the concrete with diamond tooling and dustless equipment to profile the surface and keep dust out of your home.

Illustration of a worker repairing cracks in concrete

2. REPAIRS

We fill cracks, pits and chips, then grind again for a smooth, even base.

Illustration of a worker applying the polyurea base coat

3. POLYUREA BASE COAT

We apply a 99% solids polyurea base coat that bites into the ground concrete and bonds tightly to the slab.

Illustration of a worker broadcasting decorative flakes

4. FLAKE BROADCAST

We broadcast your chosen flake color into the base for texture, slip resistance, and a custom look.

Illustration of a worker scraping and vacuuming loose flakes

5. SCRAPE & RECLAIM

Once cured, we scrape the floor in every direction, vacuum, and reclaim excess flake for a clean, even surface.

Illustration of a worker rolling the polyaspartic topcoat

6. POLYASPARTIC UV TOPCOAT

We finish with an 85% solids, UV-stable polyaspartic clear coat for a durable, showroom-quality finish.

Why Austin Homeowners Trust Foxy Epoxy With Their Garage Floors

The biggest reason a garage coating fails is bad prep. We diamond-grind every floor, repair damage before we coat and check the slab for moisture first. We use polyurea and polyaspartic systems instead of cheap epoxy kits, and we back our full-flake floors with a limited lifetime warranty.

You also deal with the owner. We've been in decorative concrete since 2015, and we price every job the same fair way. If a quote is over your budget, we'll help you choose what to include — like skipping stem walls or flakes — so you get a floor that fits.

How Much Does a Garage Floor Coating Cost in Austin?

A garage floor coating in Austin with Foxy Epoxy starts at $1,499 for a solid-color floor up to 450 sq. ft. Full-flake floors start at $1,745 for a one-car garage and $2,345 for a two-car garage. Your price depends on:

  • Square footage of the floor, plus any steps, stem walls or aprons

  • Concrete condition, including cracks, old coatings, oil stains and moisture

  • The package and colors you choose, from standard flake to custom blends

Every estimate is free. Financing is available through Synchrony.

Recent Garage Floor Projects in Austin & Central Texas

Low-angle view of a glossy gray, white and black full-flake garage floor coating with the garage door open
High-gloss light gray flake garage floor coating with the Foxy Epoxy Floors van parked in the driveway
Glossy tan and black flake epoxy garage floor coating with a polyaspartic clear coat in a two-car garage
Gray and black flake epoxy garage floor coating in a two-car garage with white walls
Black and white flake epoxy garage floor with a high-gloss finish
Gray flake garage floor coating with a coated step, Foxy Epoxy Floors van parked in the driveway
Light gray flake garage floor coating with coated stem walls in an empty garage
Close-up of a glossy gray and tan full-flake garage floor coating
Beige and brown full-flake garage floor coating with coated steps and stem walls

Garage Floor Coating FAQs

What's the best garage floor coating for Austin?

A polyurea base coat with a polyaspartic clear coat. It stays UV-stable in the sun, flexes as the slab moves and resists hot tires and chemicals better than standard epoxy.

How long does it take to coat a garage floor?

Most garages take one day. A typical two-car garage is a 6–8 hour install, and you can park on it again 24–48 hours later.

Will hot tires damage the coating?

No. Our full-flake system is built to resist hot-tire pickup and abrasion from daily driving.

Do you check the concrete for moisture first?

Yes. Every job includes a moisture assessment. If the slab needs it, we offer moisture-mitigation treatment before coating.

Can you coat a cracked or damaged garage floor?

Yes. We grind the surface and repair cracks, pits and chips before coating. Signature includes minor repair, and Premier includes more.

Can you coat over an existing epoxy or painted floor?

Usually, but the old coating has to come off first so the new system can bond to the concrete. Removal is priced separately.

What colors can I choose?

Our full-flake packages come in a range of standard flake colors, and Premier adds premium and custom blends. Solid-color floors come in Gray or Sand Tan.

Is a coated garage floor slippery?

No. The flake broadcast creates texture and traction, even when the floor is wet.

How much does it cost?

From $1,499 for solid-color, and from $1,745 (one-car) or $2,345 (two-car) for full flake. Your final price is confirmed in writing after we see the floor.

READY TO TRANSFORM YOUR CONCRETE?

Get a free, no-pressure quote from a locally owned team that does it right the first time. One-day garage installs are available across Austin and Central Texas.

READY TO TRANSFORM YOUR CONCRETE?

Get a free, no-pressure quote from a locally owned team that does it right the first time. One-day garage installs are available across Austin and Central Texas.

Serving Austin, the Hill Country & North San Antonio

Austin, TX, USA

Austin · Round Rock · Cedar Park · Georgetown · Pflugerville · Leander · Lakeway · Dripping Springs · Kyle · San Marcos · New Braunfels

We work in 39 communities within about an hour of our South Austin base.

Not sure if you're in our area? Give us a call